Tag Archives: Promote Systems

Reflection of Effort

Through consistent and tedious effort my SEO strategy is paying off. I’ve been getting calls for commercial and time lapse photography assignments in key areas I want to work during this phase of my life and career: portrait, time lapse, construction and event photography. (not necessarily in that order)

This assignment came in about a month ago: to time lapse trucks entering the Port of Long Beach’s Yusen Terminals. The idea was to measure when the heaviest and lightest traffic times occurred throughout a 20 hour cycle. The end time lapse film had to include a clock to help easily identify these key times. My camera had to be in a single, stationary position.

My client scoped out the location earlier and selected the perfect spot: inside, high, protected and with power. The only issue was reflections while shooting through glass. Here’s my solution: a Lenskirt and a black cloth on a C-stand.

TruckStops-7TruckStops-9Why have the extra black screen behind the camera? Years ago I learned the value of testing set ups before prior to a shoot. For this shoot I tested my camera, intervalometer and tripod. I allowed for reflections but not enough to prevent a reshoot. I then purchased the Lenskirt to eliminate the possibility of reflections for said reshoot. I bought this particular item because a colleague recommended it.

I needed to ensure (as much as possible), that reflections would not interfere with the content. I’m setting up for the test when I realized that the lens was going to be at an oblique angle to the glass and reflections could still be an issue. And I was correct. I mimicked my set up as closely as possible and lo and behold there were reflections even with the Lenskirt attached. The current version was designed assuming  lenses will be squared up to the glass, not at an oblique angle. I just heard from Aaron, the creator of the Lenskirt and he’s making a larger version for just this reason. Hooray!

Here’s an early frame pull prior to my 16 hour test:time lapse test shoot using a LenskirtThis cropped frame clearly shows the reflection of a basket and the wall behind it in the window. This problem was solved by adding the black cloth behind. So now on to the shoot. Once on location I cleaned the glass, set up my camera, doubled checked all connections, ran a few test frames, reset the Promote Control to begin 13+ hours hence, left and hoped for the best.

close up of Promote Controls intervalometerThe shoot went well except that outside dirt and the glass thickness caused additional issues that had to be dealt with in post:

time lapse frame pull from the Yusen Terminals night shootThe reflections being as prominent as they were surprised me. The dirt was unfortunate. If I could have arranged for a cleaning of the glass prior I would have. As I scrutinized the window during set up, I knew the dirt bunnies would be minimal and easy to remove.

Here’s the finished frame:

time lapse frame from the Yusen Terminals film

Lightroom’s spot removal tool and the sync function were invaluable in helping me build better content for this client. The larger issue here is that there are ways to get new business in the door and there are ways to successfully complete an assignment. Unknown things often happen on a shoot, success and failure change places easily and the agile and vigilant pro understand this.

As a buyer, that’s what you want in todays’ market.

The completed short film:

Thanks for reading.

Michael